The Ford F150 is one of the most popular trucks in the world. Owners love its power, reliability, and flexibility. But like any vehicle, regular maintenance is key. One of the most important things you need to know is the oil capacity—especially for the 3.7L V6 engine, which was common in several F150 models. This might seem simple, but there are many details that matter, from year differences to oil type and filter changes. Understanding these details helps keep your engine running smoothly and can prevent costly damage.
Many F150 owners are not sure how much oil to use, when to change it, or what kind of oil is best. You may also wonder about DIY oil changes, filter types, or what happens if you overfill or underfill the oil. This article will cover everything you need to know about the Ford F150 3.7 oil capacity, step by step, in clear English. We will break down the specifics for each model year, explain the impact of oil type, and answer the most common questions. If you want your F150 to last, this guide is for you.
What Is The Oil Capacity Of The Ford F150 3.7l?
The oil capacity for the Ford F150 with the 3.7L V6 engine is typically 6.0 quarts (5.7 liters) when you include a new oil filter. This is the standard amount recommended by Ford for most years and models that use this engine. However, there are small differences depending on your model year, driving habits, and whether you change the oil filter at the same time.
Why Oil Capacity Matters
Using the correct oil capacity is critical for engine health. Too little oil can lead to engine wear and overheating. Too much oil can cause foaming, leaks, or even engine damage. Always check your owner’s manual and measure the oil level with the dipstick after filling.
How To Check Your Oil Level
- Park on a level surface and turn off the engine.
- Wait at least 5 minutes for the oil to settle.
- Pull out the dipstick, wipe it clean, and reinsert it fully.
- Remove again and check the oil level. It should be between the “MIN” and “MAX” marks.
If you’re unsure, add oil slowly and check often to avoid overfilling.
Ford F150 3.7 Oil Capacity By Year
Not all F150s with a 3. 7 engine are exactly the same. Below, each year from 2011 through 2017 is covered. While the core capacity is similar, there are sometimes small differences in recommendations or filter types.
2011 Ford F150 3.7 Oil Capacity
The 2011 F150 with a 3.7L V6 engine holds 6.0 quarts (5.7 liters) with a filter change. Always use oil that meets the Ford WSS-M2C930-A specification, usually 5W-20.
2012 Ford F150 3.7 Oil Capacity
For 2012, the oil capacity remains 6.0 quarts (5.7 liters), including the filter. Make sure to use 5W-20 synthetic blend or full synthetic oil.
2013 Ford F150 3.7 Oil Capacity
The 2013 model also requires 6.0 quarts (5.7 liters) of oil with the filter. The recommended oil is 5W-20.
2014 Ford F150 3.7 Oil Capacity
In 2014, Ford continued with the 6.0 quarts (5.7 liters) recommendation with filter. Use 5W-20 for best results.
2015 Ford F150 3.7 Oil Capacity
The 3.7L engine was phased out in 2015, but in some early models, the 6.0 quarts (5.7 liters) recommendation still applies.
2016 Ford F150 3.7 Oil Capacity
By 2016, the 3. 7L was replaced with other engine options. However, if you have a special or fleet model, always confirm in your owner’s manual.
2017 Ford F150 3.7 Oil Capacity
Very few 2017 models have the 3.7, but if you do, stick with 6.0 quarts (5.7 liters) and a new filter.
All 150 Ford F150 3.7 Oil Capacity Details
Each F150 3. 7L model may have minor differences based on trim, location, or production batch. Below, you will find all 150 items—each with key details that matter to owners.
1. 2011 Xl Regular Cab, 2wd
Oil capacity is 6.0 quarts with filter. Use 5W-20 synthetic blend.
2. 2011 Xl Regular Cab, 4wd
Same as above: 6.0 quarts, but check the oil filter part number.
3. 2011 Xl Supercab, 2wd
Requires 6.0 quarts. Always replace the filter.
4. 2011 Xl Supercab, 4wd
Oil capacity is 6.0 quarts; check for leaks after oil change.
5. 2011 Xl Supercrew, 2wd
6.0 quarts with filter. Use a high-quality oil filter.
6. 2011 Xl Supercrew, 4wd
Also 6.0 quarts. Confirm filter fitment.
7. 2011 Xlt Regular Cab, 2wd
6.0 quarts. Consider using full synthetic oil for longer life.
8. 2011 Xlt Regular Cab, 4wd
Same amount: 6.0 quarts. Inspect the drain plug gasket for wear.
9. 2011 Xlt Supercab, 2wd
6.0 quarts. Use a torque wrench on the drain plug.
10. 2011 Xlt Supercab, 4wd
Oil capacity is 6.0 quarts. Always hand-tighten the filter, not too tight.
11. 2011 Xlt Supercrew, 2wd
6.0 quarts. Reset oil change reminder after service.
12. 2011 Xlt Supercrew, 4wd
Also 6.0 quarts. Double-check for drips after starting the engine.
13. 2011 Stx Regular Cab, 2wd
6.0 quarts. Clean around the filler cap before removing.
14. 2011 Stx Regular Cab, 4wd
6.0 quarts. Dispose of used oil responsibly.
15. 2011 Stx Supercab, 2wd
6.0 quarts. Check the O-ring on the filter.
16. 2011 Stx Supercab, 4wd
6.0 quarts. Always use a new filter.
17. 2011 Stx Supercrew, 2wd
6.0 quarts. Inspect for any oil leaks after filling.
18. 2011 Stx Supercrew, 4wd
6.0 quarts. Use a funnel to avoid spills.
19. 2011 Fx2, 2wd
6.0 quarts. Use only Ford-approved oil filters.
20. 2011 Fx4, 4wd
6.0 quarts. Make sure to use the correct oil filter.
21. 2011 Lariat Regular Cab, 2wd
6.0 quarts. Check the oil pan for damage.
22. 2011 Lariat Regular Cab, 4wd
6.0 quarts. Replace washer on drain plug if needed.
23. 2011 Lariat Supercab, 2wd
6.0 quarts. Use gloves to avoid burns.
24. 2011 Lariat Supercab, 4wd
6.0 quarts. Inspect filter gasket for proper seal.
25. 2011 Lariat Supercrew, 2wd
6.0 quarts. Wipe down engine area after oil fill.
26. 2011 Lariat Supercrew, 4wd
6.0 quarts. Record mileage after oil change.
27. 2011 King Ranch Supercrew, 2wd
6.0 quarts. King Ranch trim uses standard filter.
28. 2011 King Ranch Supercrew, 4wd
6.0 quarts. Use a quality synthetic blend.
29. 2011 Harley-davidson Supercrew, 2wd
6.0 quarts. Check for special edition oil caps.
30. 2011 Harley-davidson Supercrew, 4wd
6.0 quarts. Confirm filter size matches.
31. 2011 Platinum Supercrew, 2wd
6.0 quarts. Use the Ford-recommended oil.
32. 2011 Platinum Supercrew, 4wd
6.0 quarts. Filter replacement is critical.
33. 2011 Svt Raptor Supercab, 4wd
6.0 quarts. Raptor uses same 3.7L oil specs.
34. 2011 Svt Raptor Supercrew, 4wd
6.0 quarts. Confirm oil cooler if equipped.
35. 2012 Xl Regular Cab, 2wd
6.0 quarts. No change from 2011.
36. 2012 Xl Regular Cab, 4wd
6.0 quarts. Always check the dipstick after filling.
37. 2012 Xl Supercab, 2wd
6.0 quarts. Look for leaks after filter change.
38. 2012 Xl Supercab, 4wd
6.0 quarts. Wipe dipstick before checking.
39. 2012 Xl Supercrew, 2wd
6.0 quarts. Dispose of oil properly.
40. 2012 Xl Supercrew, 4wd
6.0 quarts. Hand-tighten filter only.
41. 2012 Xlt Regular Cab, 2wd
6.0 quarts. Reset maintenance light.
42. 2012 Xlt Regular Cab, 4wd
6.0 quarts. Use new crush washer.
43. 2012 Xlt Supercab, 2wd
6.0 quarts. Inspect filter area for debris.
44. 2012 Xlt Supercab, 4wd
6.0 quarts. Check for leaks after oil change.
45. 2012 Xlt Supercrew, 2wd
6.0 quarts. Confirm oil level after first run.
46. 2012 Xlt Supercrew, 4wd
6.0 quarts. Do not over-tighten the filter.
47. 2012 Stx Regular Cab, 2wd
6.0 quarts. Use correct filter.
48. 2012 Stx Regular Cab, 4wd
6.0 quarts. Use synthetic blend for best results.
49. 2012 Stx Supercab, 2wd
6.0 quarts. Clean area around oil filler cap.
50. 2012 Stx Supercab, 4wd
6.0 quarts. Replace drain plug if worn.
51. 2012 Stx Supercrew, 2wd
6.0 quarts. Inspect oil for metal particles.
52. 2012 Stx Supercrew, 4wd
6.0 quarts. Use a funnel for filling.
53. 2012 Fx2, 2wd
6.0 quarts. Use genuine Ford filter.
54. 2012 Fx4, 4wd
6.0 quarts. Replace filter every oil change.
55. 2012 Lariat Regular Cab, 2wd
6.0 quarts. Dispose of filter properly.
56. 2012 Lariat Regular Cab, 4wd
6.0 quarts. Record date and mileage.
57. 2012 Lariat Supercab, 2wd
6.0 quarts. Clean up any spills.
58. 2012 Lariat Supercab, 4wd
6.0 quarts. Use gloves to protect hands.
59. 2012 Lariat Supercrew, 2wd
6.0 quarts. Recheck oil level after engine runs.
60. 2012 Lariat Supercrew, 4wd
6.0 quarts. Wait 5 minutes before checking oil.
61. 2012 King Ranch Supercrew, 2wd
6.0 quarts. Premium filter recommended.
62. 2012 King Ranch Supercrew, 4wd
6.0 quarts. Use Ford-approved oil.
63. 2012 Harley-davidson Supercrew, 2wd
6.0 quarts. Special edition uses standard capacity.
64. 2012 Harley-davidson Supercrew, 4wd
6.0 quarts. Check filter for special markings.
65. 2012 Platinum Supercrew, 2wd
6.0 quarts. Use full synthetic for extended intervals.
66. 2012 Platinum Supercrew, 4wd
6.0 quarts. Confirm oil spec before adding.
67. 2012 Svt Raptor Supercab, 4wd
6.0 quarts. High-performance filter suggested.
68. 2012 Svt Raptor Supercrew, 4wd
6.0 quarts. Check for filter leaks.
69. 2013 Xl Regular Cab, 2wd
6.0 quarts. Replace filter every oil change.
70. 2013 Xl Regular Cab, 4wd
6.0 quarts. Inspect for leaks after running engine.
71. 2013 Xl Supercab, 2wd
6.0 quarts. Use torque wrench on drain plug.
72. 2013 Xl Supercab, 4wd
6.0 quarts. Reset oil change reminder.
73. 2013 Xl Supercrew, 2wd
6.0 quarts. Clean around filter area.
74. 2013 Xl Supercrew, 4wd
6.0 quarts. Inspect filter gasket for wear.
75. 2013 Xlt Regular Cab, 2wd
6.0 quarts. Use correct oil filter.
76. 2013 Xlt Regular Cab, 4wd
6.0 quarts. Use new drain plug washer.
77. 2013 Xlt Supercab, 2wd
6.0 quarts. Check oil level after first run.
78. 2013 Xlt Supercab, 4wd
6.0 quarts. Do not over-tighten filter.
79. 2013 Xlt Supercrew, 2wd
6.0 quarts. Dispose of oil responsibly.
80. 2013 Xlt Supercrew, 4wd
6.0 quarts. Always use new filter.
81. 2013 Stx Regular Cab, 2wd
6.0 quarts. Clean oil fill area.
82. 2013 Stx Regular Cab, 4wd
6.0 quarts. Inspect oil pan for leaks.
83. 2013 Stx Supercab, 2wd
6.0 quarts. Use synthetic blend for best results.
84. 2013 Stx Supercab, 4wd
6.0 quarts. Replace drain plug if worn.
85. 2013 Stx Supercrew, 2wd
6.0 quarts. Inspect oil for metal debris.
86. 2013 Stx Supercrew, 4wd
6.0 quarts. Use a funnel when filling.
87. 2013 Fx2, 2wd
6.0 quarts. Use Ford-recommended filter.
88. 2013 Fx4, 4wd
6.0 quarts. Replace filter each time.
89. 2013 Lariat Regular Cab, 2wd
6.0 quarts. Dispose of oil filter properly.
90. 2013 Lariat Regular Cab, 4wd
6.0 quarts. Record mileage and date.
91. 2013 Lariat Supercab, 2wd
6.0 quarts. Clean up oil spills.
92. 2013 Lariat Supercab, 4wd
6.0 quarts. Use gloves for protection.
93. 2013 Lariat Supercrew, 2wd
6.0 quarts. Check oil level after running.
94. 2013 Lariat Supercrew, 4wd
6.0 quarts. Wait before checking oil.
95. 2013 King Ranch Supercrew, 2wd
6.0 quarts. Premium oil filter suggested.
96. 2013 King Ranch Supercrew, 4wd
6.0 quarts. Use Ford-approved oil.
97. 2013 Platinum Supercrew, 2wd
6.0 quarts. Use synthetic for long intervals.
98. 2013 Platinum Supercrew, 4wd
6.0 quarts. Confirm oil meets Ford specs.
99. 2013 Svt Raptor Supercab, 4wd
6.0 quarts. Use high-performance filter.
100. 2013 Svt Raptor Supercrew, 4wd
6.0 quarts. Check for leaks after filling.
101. 2014 Xl Regular Cab, 2wd
6.0 quarts. Standard filter required.
102. 2014 Xl Regular Cab, 4wd
6.0 quarts. Inspect filter for proper fit.
103. 2014 Xl Supercab, 2wd
6.0 quarts. Clean area before opening.
104. 2014 Xl Supercab, 4wd
6.0 quarts. Use correct torque on plug.
105. 2014 Xl Supercrew, 2wd
6.0 quarts. Wipe area after filling.
106. 2014 Xl Supercrew, 4wd
6.0 quarts. Inspect for leaks.
107. 2014 Xlt Regular Cab, 2wd
6.0 quarts. Replace drain plug washer.
108. 2014 Xlt Regular Cab, 4wd
6.0 quarts. Use correct filter.
109. 2014 Xlt Supercab, 2wd
6.0 quarts. Check oil after running.
110. 2014 Xlt Supercab, 4wd
6.0 quarts. Do not overfill.
111. 2014 Xlt Supercrew, 2wd
6.0 quarts. Dispose oil responsibly.
112. 2014 Xlt Supercrew, 4wd
6.0 quarts. Always replace filter.
113. 2014 Stx Regular Cab, 2wd
6.0 quarts. Clean fill area.
114. 2014 Stx Regular Cab, 4wd
6.0 quarts. Inspect oil pan.
115. 2014 Stx Supercab, 2wd
6.0 quarts. Use synthetic blend.
116. 2014 Stx Supercab, 4wd
6.0 quarts. Check drain plug.
117. 2014 Stx Supercrew, 2wd
6.0 quarts. Inspect oil for debris.
118. 2014 Stx Supercrew, 4wd
6.0 quarts. Use a funnel.
119. 2014 Fx2, 2wd
6.0 quarts. Ford filter recommended.
120. 2014 Fx4, 4wd
6.0 quarts. Replace filter every time.
121. 2014 Lariat Regular Cab, 2wd
6.0 quarts. Dispose filter correctly.
122. 2014 Lariat Regular Cab, 4wd
6.0 quarts. Record service date.
123. 2014 Lariat Supercab, 2wd
6.0 quarts. Clean spills after change.
124. 2014 Lariat Supercab, 4wd
6.0 quarts. Wear gloves.
125. 2014 Lariat Supercrew, 2wd
6.0 quarts. Check oil after engine runs.
126. 2014 Lariat Supercrew, 4wd
6.0 quarts. Wait before checking.
127. 2014 King Ranch Supercrew, 2wd
6.0 quarts. Use premium filter.
128. 2014 King Ranch Supercrew, 4wd
6.0 quarts. Ford-approved oil only.
129. 2014 Platinum Supercrew, 2wd
6.0 quarts. Use synthetic oil.
130. 2014 Platinum Supercrew, 4wd
6.0 quarts. Confirm oil spec.
131. 2014 Svt Raptor Supercab, 4wd
6.0 quarts. High-performance filter.
132. 2014 Svt Raptor Supercrew, 4wd
6.0 quarts. Inspect for leaks.
133. 2015 Xl Regular Cab, 2wd
6.0 quarts. Last year for 3.7L in some trims.
134. 2015 Xl Regular Cab, 4wd
6.0 quarts. Confirm engine code.
135. 2015 Xl Supercab, 2wd
6.0 quarts. Check oil filter fit.
136. 2015 Xl Supercab, 4wd
6.0 quarts. Use correct oil.
137. 2015 Xl Supercrew, 2wd
6.0 quarts. Dispose oil properly.
138. 2015 Xl Supercrew, 4wd
6.0 quarts. Inspect for leaks.
139. 2015 Xlt Regular Cab, 2wd
6.0 quarts. Replace filter.
140. 2015 Xlt Regular Cab, 4wd
6.0 quarts. Use synthetic blend.
141. 2015 Xlt Supercab, 2wd
6.0 quarts. Clean fill area.
142. 2015 Xlt Supercab, 4wd
6.0 quarts. Use new washer.
143. 2015 Xlt Supercrew, 2wd
6.0 quarts. Check oil level.
144. 2015 Xlt Supercrew, 4wd
6.0 quarts. Do not over-tighten.
145. 2015 Lariat Supercrew, 2wd
6.0 quarts. Use premium oil.
146. 2015 Lariat Supercrew, 4wd
6.0 quarts. Confirm filter type.
147. 2015 King Ranch Supercrew, 2wd
6.0 quarts. Ford-approved oil.
148. 2015 King Ranch Supercrew, 4wd
6.0 quarts. Inspect after filling.
149. 2015 Platinum Supercrew, 2wd
6.0 quarts. Use synthetic for best results.
150. 2015 Platinum Supercrew, 4wd
6.0 quarts. Last year with 3.7L in some trims.
Oil Change Process For Ford F150 3.7
Changing your own oil can save money and help you learn more about your truck. Here’s a clear step-by-step process for the 3.7L engine:
- Gather supplies: 6 quarts of 5W-20 oil, new filter, wrench, oil pan, funnel, gloves.
- Warm up the engine for 2-3 minutes.
- Turn off the engine and let cool slightly.
- Remove the drain plug and let oil flow into the pan.
- Remove the old oil filter.
- Lubricate the gasket on the new filter with fresh oil.
- Install the new filter by hand.
- Replace the drain plug, tighten to 20-30 ft-lbs.
- Add 5 quarts of oil, check level, then slowly add more until full (usually 6 quarts).
- Start the engine, check for leaks, and recheck the oil level.
Non-obvious tip: Never skip lubricating the new filter’s gasket. A dry gasket can stick and tear, causing leaks. Also, always double-check the old filter’s gasket came off; sometimes it sticks to the block.
Oil Filter Options For Ford F150 3.7
The filter is just as important as the oil. Ford recommends the Motorcraft FL-500S filter for most 3.7L engines. Other brands may fit, but always confirm fitment, as incorrect filters can cause leaks or poor filtration.
Filter Comparison
Here’s a look at some popular options.
| Brand | Part Number | Quality | Price Range |
|---|---|---|---|
| Motorcraft | FL-500S | OEM | $$ |
| Fram | Ultra XG10575 | Premium | $$$ |
| Bosch | 3330 | Good | $$ |
| WIX | 57502 | High | $$$ |
Choose a filter with a strong anti-drainback valve to protect your engine during cold starts.
Oil Type And Viscosity
Ford recommends 5W-20 for the 3.7L engine. You can use synthetic blend or full synthetic. Full synthetic oil lasts longer and protects better, especially in extreme temperatures.
Synthetic Vs. Blend
- Synthetic blend: Good for normal use, shorter intervals.
- Full synthetic: Better for towing, extreme heat/cold, longer intervals.
Switching to full synthetic can sometimes improve fuel economy and engine cleanliness.
Common Oil Change Mistakes
Many owners make the same mistakes during oil changes. Here are a few to avoid:
- Using the wrong oil type or viscosity.
- Not replacing the oil filter.
- Over-tightening the filter or drain plug.
- Forgetting to add enough oil.
- Not checking for leaks after the change.
- Using a cheap filter that doesn’t fit well.
Non-obvious tip: Old or worn drain plug washers can cause slow leaks. Always replace them if you notice any damage.
How Often Should You Change Oil?
For the Ford F150 3.7, Ford recommends changing the oil every 7,500 miles (12,000 km) or every 6 months, whichever comes first. If you do a lot of towing or drive in dusty conditions, change oil more often.
Diy Vs. Professional Oil Changes
Doing your own oil changes saves money, but only if you do it right. If you are not sure, or if you notice anything unusual (like metal in the oil), go to a professional. They can also check for other issues during the service.
Environmental Responsibility
Used oil is toxic. Always take it to a recycling center—never dump it on the ground or in the trash. Many auto parts stores accept used oil for free.
Quick Reference: Ford F150 3.7 Oil Capacity (all Trims/years)
Here’s a summary for fast reference:
| Model Year | Engine | Oil Capacity (with filter) | Oil Type |
|---|---|---|---|
| 2011-2015 | 3.7L V6 | 6.0 quarts (5.7L) | 5W-20 |
For any differences due to production changes, always check your owner’s manual.
Impact Of Oil Capacity On Engine Performance
The correct oil level keeps your engine parts moving smoothly and prevents overheating. Too little oil causes increased friction and wear. Too much oil creates pressure problems, leaks, or even engine damage.
What Happens If You Overfill Or Underfill?
- Overfill: Oil can foam, reducing lubrication. It can also damage seals or the catalytic converter.
- Underfill: Engine parts may run dry, causing rapid wear or even engine seizure.
Always check the dipstick after filling to ensure the level is correct.
Signs You Need An Oil Change
If you notice any of these, change your oil soon:
- Oil looks very dark or gritty
- Engine is louder than usual
- Warning light is on
- Oil level is low
Even if you do not drive much, change oil at least every 6 months.
Where To Find More Information
Always check your owner’s manual for the most accurate and up-to-date specifications. For more details about Ford’s maintenance guidelines, you can visit the official Ford Support Oil Change page.
Frequently Asked Questions
How Much Oil Does A Ford F150 3.7 Take With Filter?
The Ford F150 3.7L engine takes 6.0 quarts (5.7 liters) of oil when you also change the oil filter. Always check the dipstick after filling to confirm the level.
Can I Use 5w-30 Instead Of 5w-20 In My F150 3.7?
Ford recommends 5W-20 for the 3.7L engine. Using 5W-30 is not advised unless you live in an area with very high temperatures and Ford specifically approves it. Always follow the owner’s manual.
What Happens If I Put Too Much Oil In My F150 3.7?
Too much oil can cause foaming, leaks, and engine damage. It’s important to drain out the excess if you overfill. Check the dipstick after adding oil and keep it between the MIN and MAX marks.
How Often Should I Change The Oil In My Ford F150 3.7?
Change your oil every 7,500 miles (12,000 km) or 6 months, whichever comes first. Change it more often if you tow, drive in dust, or do many short trips.
What Oil Filter Should I Use For The F150 3.7?
Ford recommends the Motorcraft FL-500S oil filter for the 3.7L engine. Other brands may work, but always make sure they fit and meet Ford’s quality standards.
Caring for your Ford F150 3.7 with the right oil and filter helps your truck last longer and perform better. Regular oil changes and using the correct oil capacity will keep your engine strong for many miles.